Featured Products
Recent News
New Valve Gate System with a minimum 5.8mm Gate spacing
A new valve gate hot runner system with miniature space requirements was developed by Heitec Heißkanaltechnik GmbH from Burgwald, Germany represented in North America by Technoject Machinery Corp.
Based on the already existing Flat-Line Nozzle platform 61.041 the new nozzle design achieves a minimum nozzle spacing of less than 6 mm. With this design a complete valve gate system with e.g. 4, 8, 16 or more nozzles can be arranged in very small mold base sizes resulting in lower mold costs, higher productivity, more design flexibility and less melt residence time.
Rain/Light Sensors
As a motorist one values any aids which make driving easier. “Rain/light sensors” are just those aids. When dusk sets in or a certain brightness value is not reached, the headlights turn on automatically.In a similar automatic manner wipers come into action when the rain sensor reacts accordingly, or else the sun sensor sends corresponding data to the climate control unit and the air conditioning responds. Another function of the “Rain/Light sensor” is that the blower starts when humid air is detected inside the car.
Edge Gating with High Energy Efficiency
5.5mm Flat Nozzle
Technoject Machinery Corp. (Bolton, ON) offers a HEITEC hot runner nozzle that allows a cavity spacing from only 5.5 mm, resulting in maximum production efficiency. With its small installation dimensions it no longer hinders or interferes with any cavity detail. It was further developed from the Flat-line Series, which has been established in the market for more than 10 years as flat nozzles with a sealing diameter of 6 mm and a min. required distance from 7 mm.